DELTA Compact VFD Drive

Product Details:

Delta's Sensorless Vector Control Drive CP2000 Series has extended the idea of energy saving and uses this principal as the basis of its design. The CP2000 is specifically designed for applications such as air blowers, pumps and HVAC drives with its intelligent PID control providing the greatest efficiency. The Sensorless Vector Control (SVC) offers timely response to load torque increase/decrease which satisfies customer requirements for load changes while enhancing motor performance. A 3-step V/F curve response is used in the variable torque environment to adequately adjust the input voltage and attain the greatest overall performance; this function is especially helpful in pumps and fans applications. It also includes additional functions for operation and protection in variable load environments, such as flying starts, auto-acceleration/deceleration, momentary power loss restarts, auto-tuning, and more. The CP2000 series provides you with the ultimate energy-saving solution for your applications.

Application:

• Fixed-displacement pumps (fix flow and fix time), building automation, factory automation, HVAC drives, cooling pumps, cooling towers and general motor applications.

Specifications:

• With a built-in 10K steps Delta PLC allows user to execute distributional control and independent control when connecting to a network system. Delta CP2000 series drives provide you the intelligent control possibility beyond your imagination.
• The calendar function allows user to program the PLC procedure, the ON/OFF in chronological order, the daylight saving time and etc.
• The modularized design eases the maintenance and expansion.
• High speed communication interfaces with MODBUS protocol and BACnet protocol built in. Diverse communication methods to satisfy clients@@ needs on multi-controls. So the following options are available for you: the ProfiBUS-DP, the DeviceNet, the MODBUS TCP, the Ethernet-IP and the CANopen Cards.
• Long-life design and self diagnosis for key components.
• Special PCB coating design (Printed Circuit Board) for enhancing environmental tolerance.
• Complied with global safety standards: CE, UL and cUL
• Standard LCD model (IP20/NEMA1) with built-in PLC to support up to 10K steps
• Excellent heat-sink design. Able to operate at 50°C ambient temperature and to adjust automatically rated output value to make the AC drive to work continuously.
• Run fire mode while emergency to have uninterrupted smoke releasing and pressure adding
• Multi pumps control at fixed amount, fixed time circulating control. Able to control 8 pumps at the same time. (Such as Image01 and Image02, optional multi-control relay card is required.)

Additional Information:

• Production Capacity: Any no's with proper delivery time.
• Delivery Time: 2 weeks
• Packaging Details: Box Packing

Product Details:

Sensorless Vector Micro AC Drive. The compact design is ideal for small and medium horsepower applications. The M drive is designed to provide an ultra-low-noise operation, and includes several innovative technologies that reduce interference.

Applications:

• Packing machine; dumpling machine; treadmill; temperature/humidity control fan for agriculture and aquaculture; mixer for food processing; grinding machine; drilling machine; small size hydraulic lathe; elevator; coating equipment; small size milling machine; robot arm of injection machine (clamp); wood machine (two-side woodworking planer); edge bending machine, elasticizer, etc.

 

Specifications:

• Adjustable V/f curve and vector control
• Auto torque boost & slip compensation
• Built-in PID feedback control
• 0 speed holding function
• Built-in sleep / revival function

Product Details:

Flux Vector/Torque Control AC Drive. Offering V/F, Open Loop, Closed Loop and high speed control options. All VFD-V series drives are constant and variable torque rated. This NEMA 1rated flux vector drive is capable of 0-3000Hz in V/F mode, and offers rapid response, pinpoint servo position control and speed adjustment.

Applications:

• Woodcarving machine; crane hoisting; drilling machine; CNC lathe; tooling machine; middle/low-speed passenger elevator; PCB routing machine, etc.

 

Specifications:

• Adjustable V/f curve
• Automatic torque boost and slip compensation
• 16-step preset speed control and 15-step PLC operation
• Built-in PID feedback control with Sleep/Wake function
• Optional PG encoder card for speed feedback and positioning
• 4 sets of accel/decel time selections and independent accel/decal S-curve settings
• Specific process control and energy saving operation for fan and pump application
• Built-in communication interface RS-485 Modbus (RJ11)
• Auto-tuning and FOC (field oriented vector control)

Product Details:

Sensorless Vector AC Micro Drive. The VFD-E series represent Delta Electronics low horsepower, constant torque, IP20 rated Drive. Modular in design with flexible extension cards and a built-in PLC function, the E drive offers the ability to write and to execute simple Ladder Logic programs. This state-of-the-art series meets a full range of application requirements.

Applications:

• Smaller cranes; washing machines; treadmilsl; robot arm of injection machine (clamp); elevator; grinding machine; drilling machine; wood machine; webbing loom; air conditioner for large buildings; water supply system for large buildings, etc.

 

Specification:

• Optional Fieldbus Modules (DeviceNet, Profibus, LonWorks and CANopen)
• RFI-switch for mains
• Easy DC BUS sharing
• Flexible extension
• Complete Protection
• Built-in PLC function
• Modular & compact design

Product Details:

General Purpose AC Micro Drive. Delta Electronics most cost effective general purpose drive. The VFD-S series drive is famous for its low-noise carrier frequency feature and easy to use keypad.

Applications:

• Air conditioner for large buildings; water supply system for large buildings; temperature control of middle/large oven; webbing loom; packing machine; conveyer belt; fan of drying machine, etc.

Specifications:

• Adjustable V/f curve
• Built-in PID feedback control
• Momentary power failure or fault restart
• Built-in Sleep / Revival function

Product Details:

Sub-fractional low cost AC Drive. Specifically designed for low horsepower applications with built-in EMI filter to efficiently reduce electromagnetic interference and to conform to the CE EMI directive.

Specifications:

• Adjustable V/f curve
• Auto torque boost and slip compensation
• Build-in MODBUS communication
• Built-in EMI filter

Product Details:

The VFD-EL series is multiple function new generation micro type AC drive. It has built in EMI filter, RFI switch, easy DC bus sharing for side-by-side installation, high precision current detection, overload protection, and a built In keypad.

Specifications:

• 3 points adjustable V/f curve
• Built-in PID feedback control
• RFI-switch for IT mains
• Built-in EMI filter
• Use RS-485 communication interface (RJ-45) with Modbus protocol
• Optional communication modules for multiple communication protocols, such as Profibus, DeviceNet, LonWorks and CANopen
• Complete protection function

Product Details:

Variable speed drives used to control AC motors are called AC drives. ... The inverter is only one part of an AC drive, however, it is common practice to refer to an AC drive as an inverter. Before discussing AC drives it is necessary to understand some of the basic terminology associated with drive operation.

Additional Information:

• Item Code: 101
• Production Capacity: Any no's with proper delivery time.
• Delivery Time: Available
• Packaging Details: Box Packing

Product Details:

MS300 Series Delta Compact Drive is a standard compact vector control drive that inherits Delta’s superior drive technology. It supports both IM and PM motor control for application flexibility and provides STO safety mechanism. Also built-in various essential functions, including PLC capacity for simple programming needs, a communication slot for various communication cards, and a USB port to make data uploads and downloads fast and easy. Saving space, reducing setup and wiring time, while providing high efficiency and stability system —all included in the MS300 series with drive size reduced up to 40%.

Specifications:

• Supports Open loop control of IM and PM motors
• Built-in brake choppers for the entire series
• Removable 5-digit LED keypad for remote operation
• Safety standard compliance: Safe Torque Off (SIL2/PLd)
• Multi-motor Control，built-in four IM motor control parameters
• Optional built-in Class A (C2) standard EMC filter for 1-phase 230V, 3-phase 460V models
• One high speed pulse input terminal MI7 built-in with maximum speed up to 33kHz
• One high speed pulse output terminal DFM built-in with maximum speed up to 33kHz
• New PCB coating for circuit (IEC 60721-3-3 class 3C2) and thermal design suitable for harsh environment applications
• Built-in RS-485 (Modbus) and various communication card options : CANopen, PROFIBUS DP, DeviceNet, MODBUS TCP, EtherNet/IP, EtherCAT

Product Details:

Delta‘s ME300 Series is a new generation compact vector control drive that inherits Delta’s superior drive technology, but with a 60% reduction in size. It supports both IM and PM motors, providing higher efficiency and flexibility. Various built-in essential functions are standard to reduce the need for additional expenses and to shorten installation time. The STO function is an option that prevents damage.

With its user-friendly operation, ultra-compact size, quick installation, and flexible, durable design, the ME300 is your key to increased market competitiveness and greater success.

Specifications:

• Supports IM / PM motors and VF / SVC open loop control
• 2 sets of motor parameters for multi-motor control
• Supports high speed pulse and PWM signal input for simple close loop
• Built-in single / multi-pump function
• Built-in brake choppers for the entire series
• Optional built-in EMC filter
• Optional built-in Safe Torque Off (SIL2/PLd)
• 100% PCB coating for circuit (IEC 60721-3-3 class 3C2) and thermal design for harsh environment

Product Details:

Delta's CFP2000 series is an AC motor drive specially designed for HVAC, fans & pumps, and water treatment applications. It is designed with an IP55 enclosure to provide effective protection from dust and other particles and to offer a good level of protection from water. In addition, it includes many outstanding features and built-in functions that reduce setup and tuning time in operation and provide higher efficiency.

The CFP2000 is equipped with a built-in EMC filter and a DC choke. This design replaces the need for an electrical distribution cabinet and saves space for other devices, while providing the benefits of harmonic suppression and better power quality to the system. Various parameter groups are also included, which allow you to simply select the needed application in the parameter group setting and the system setup is ready. If a higher safety standard is required, an optional main switch function is also available upon selection. Other outstanding features include support for both IM/PM motors, a real time clock, built-in 10k steps PLC capacity and various optional extension cards. The CFP2000 series integrates all of your needs into one drive. It is the friendliest and smartest choice available in the industry.

Specifications:

• Optional built-in mains switch for IP55 models
• Built-in EMC filter; IEC61800-3 C2, C1 standard
• Built-in DC reactor effectively lowers harmonic distortion; IEC61000-3-12 standard
• PCB (Printed Circuit Board) enhances drive durability; Class 3C3 standard
• Built-in application selections and a quick start function simplify installation and setup and save parameter setting time
• Fire mode provides PID control and a bypass alarm function that ensures uninterrupted drive operation to extract smoke, supply water, and balance pressure at the emergency exit
• Built-in PLC function 10k steps and Real Time Clock (RTC)
• 2 sets of PID controller functions
• Built-in Safe Torque Off (STO) SIL2 function
• Built-in MODBUS and BACnet MS/TP communication