MASIBUS Indicators

Product Details:

Masibus' Digital Indicator, Model 406 and 408-M is a micro-controller based 4 digit process indicator, designed to accept multiple input types.
Model 406 has 0.56" display size and model 408-M has 0.8"display size which facilitates plant operator to read process data very conveniently from a far distance.Both models are equipped with field selectable inputs and fieldscalable ranges for flexible operations Built-in transmitter power supply eliminates the need of additional power supply to excite field transmitter, which makes this model wellequipped.It is a low cost high performance indicator which offers high accuracy of ±0.25% of full scale.
This model can be used for Pt100, five different types of thermocouples and four types of linear inputs.It is easy to operate and configuration is user friendly. CJCcompensation for thermocouple input is done through software forhigher accuracy.The input is protected from reverse connection and over range inputs.

Features:

- 4 digits, 0.56" or 0.8” LED Display- Universal input (TC, RTD, Volts, mA)- Transmitter Power Supply- Excellent longterm stability- Easy configuration from front keys

Applications: 

- Temperature & process indication- Plastics molding/extrusion temperature monitoring- Heat treatment - furnace temperature monitoring- Chillers- Water heating boilers- Oven control- Pressure/ Level/ Flow Monitoring.

Additional Information:

• Item Code: 406408M
• Production Capacity: any No's
• Delivery Time: 12 Weeks
• Packaging Details: Industry Standard

Product Details:

The Filter Display Unit FDU can measure/ display differential pressure for up to three Filters using inbuilt sensors and is designed to give fast & accurate display of differential pressure across the Filters. FDU has up to 3 dedicated 4-digit seven-segment, 0.56” Red LED displays to display PRE, FINE and HEPA Filters readings.

FDU has an inbuilt buzzer for audible alarm on Filter set point exceedance, the Filter display also blinks on set point exceedance for operator’s attention. It has RS485 communication port with MODBUS-RTU protocol for interfacing with PLC/DCS/SCADA systems. It has two digital inputs to indicate the AHU ON-OFF/TRIP status. The unit comes with free utility software for configuration and calibration. FDU is a cost effective replacement for analog mechanical pressure gauges.

The Filter Display Unit (FDU) is a device which can measure/display diferential pressure across the 3 filters of an AHU. With built-in digital sensors, it is designed to give fast and accurate display of differential pressure across the PRE, FINE, and HEPA filters of an AHU. It has up to 3 dedicated 4-digit seven segmet, 0.56″ Red LED displays to display the differential pressure reading across the three (03) filters.

FDU has an inbuilt buzzer for audible alarm on Filter set point exceedance, the filter display also blinks on set point exceedance for the operator’s attention.

It has RS-485 communication port with MODBUS-RTU protocol to interface with PLC/DCS/SCADA systems. The unit comes with free utility software for configuration ad calibration. FDU is a cost effective replacement for analog mechanical differential pressure gauges.
Masibus FDU is use for DP indicator,Differential pressure indicator,multi channel DP indicator with AHU or any HVAC system to monitor filter healthiness with BMS system.

Features

• Micro-controller based 3 Filter differential pressure Indicator
• Up to 3, 0.56”, 4-digit Red LED Filter displays
• Software programmable Filter ranges
• 3 programmable Hi/Lo alarms with Audio/visual annunciation
• RS485/MODBUS RTU communication for PLC, SCADA, etc
• Built in AHU OFF/TRIP status LED indications via digital inputs
• AHU OFF/TRIP soft status Available on Modbus
• Free utility software for configuration and calibration

Applications

• HVAC Filter condition monitoring

Industries

• Clean Room
• Hospital
• HVAC system

Additional Information:

• Item Code: FDU
• Production Capacity: any
• Delivery Time: 12 Weeks
• Packaging Details: Industry Standard

Product Details:

Model 409-4IN and 409-6IN are the large display Indicator,Jumbo display indicator which can be monitored up to distance of 160 feet (50m). 409-4IN has 100 mm Red LED display and 409-6IN has 150 mm P10 based Red LED module display. Its large digit facilitates process value to be monitored across wider geographical area in plant. It has most advanced features for monitoring and communication of process status.
Model 409-4IN / 409-6IN accepts 21 different industry standard inputs with high accuracy of 0.1% to measure temperature, pressure and other process variables. It is easy to operate and configuration is user friendly. CJC compensation for thermocouple input is done through software for higher accuracy.
Model 409-4IN / 409-6IN can be interfaced with SCADA/PLC using optional RS485 communication and analog retransmission output for process automation. It has two-way communication facility allowing user to read and write PV over Modbus between any Master device and Indicator.
Alarm can be configured for two set points which are indicated on front Status LEDs. This Indicator has SMPS power supply for smooth and reliable performance. It is also equipped with transmitter power supply.
Model 409-4IN utilizes its unique feature of LED brightness control which enables plant engineers/ operators to adjust intensity of controllers’ LED display in order to achieve comfort for eyes.
Model 409-6IN display has a high brightness for outdoor application.
Model 409-4IN / 409-6IN is equipped with advanced functions like digital filtering, password setting, input and output protection and square root function for optimum process functionality.
Model 409-4IN and 409-6IN are the use in various application like outdoor display indicator,large display temperature indicator,large display process indicator etc.

Features

• 409-4IN: 4” (100mm) Large Red LED Display
• 409-6IN: 6″ (150mm) Large P10 based Red LED module
• 21 selectable input types (TC, RTD, mV, mA, V, Ω)
• Transmitter Power Supply
• RS485 serial communication (optional)
• PV write facility via Serial input
• Programmable retransmission output (optional)
• Two programmable alarm outputs (optional)
• Available with 19” Rack & IP65 Wall mount enclosure
• Display brightness control
• Serial RS485 Input (Modbus Slave Read/Write)
• Input Scalability for Linear input type
• Square Root Extraction for linear input type.
• Selectable Digital Filter 0-60 Sec
• 409-6IN display has a high brightness for outdoor application

Applications

• Temperature & process indication
• Pressure/ Level/ Flow Monitoring
• Plastics molding/extrusion temperature monitoring
• Heat treatment – furnace temperature monitoring
• Weighing platform
• Remote Process Supervision

Industries

• Cement
• Fertilizer

Additional Information:

• Item Code: 409-4IN409-6IN
• Production Capacity: Any Nos
• Delivery Time: 15 Weeks
• Packaging Details: Industry Standard

Product Details:

Masibus 409 is a micro-controller based 5 digit process indicator, Temperature indicator designed to accept multiple input types and two programmable set points with individual relays. Model 409 is a stable & rugged indicator, the first choice of OEMs and end users.

Model 409 accepts 21 different industry standard inputs with high accuracy of 0.1% to measure temperature, pressure and other process variables. It is easy to operate and configuration is user friendly. CJC compensation for thermocouple input is done through software for higher accuracy.

It can be interfaced with SCADA/PLC using optional RS485 communication and analog retransmission output for process automation. It has two-way communication facility allowing user to read and write PV over Modbus between any Master device and Indicator.

Alarm can be configured for two set points which are indicated on front Status LEDs. Model 409 has a powerful watchdog circuit with close monitoring of software loop that ensures the proper instrument operation in case of power spikes that are very common in industrial environment. This Indicator has SMPS power supply for smooth and reliable performance. It is also equipped with transmitter power supply.

Model 409 utilizes its unique feature of LED brightness control which enables plant engineers/ operators to adjust intensity of controllers’ LED display in order to achieve comfort for eyes.

Model 409 is equipped with advanced functions like digital filtering, password setting, input and output protection and square root function for optimum process functionality Digital input facility is available to reset process value logged for min & max value as ‘PV Hi’ & ‘PV Lo’ parameters respectively.

Model 409 smart indicator ,smart process indicator ,universal temperature indicator also use as indicator with Alarm and Trip application.

Features

 

• 5 digit 0.56” Display
• 21 selectable input types (TC, RTD, mV, mA, V, ???)
• Transmitter Power Supply
• RS485 serial communication (optional)
• PV write facility via Serial input
• Programmable retransmission output (optional)
• Two independent programmable alarm output
• Digital Input-Reset PV min/max value
• Display brightness control
• Serial RS485 Input (Modbus Slave Read/Write)
• Input Scalability for Linear input type
• Square Root Extraction for linear input type
• Selectable Digital Filter 0-60 Sec

Applications

• Temperature & process indication
• Pressure/ Level/ Flow Monitoring
• Plastics molding/extrusion temperature monitoring
• Heat treatment – furnace temperature monitoring
• Weighing Measurement

Additional Information:

• Item Code: Process-Indicator-409
• Production Capacity: Any Nos
• Delivery Time: 12 Weeks
• Packaging Details: Industry Standard

Product Details:

Masibus model CDU Clean Room Display Unit is designed to measure and display Temperature, Humidity and Differential Pressure in one compact enclosure.
CDU Clean Room Display Unit accepts analog input from Temperature, Humidity and Differential pressure sensors, optionally the sensors for all 3 parameters are integrated inside for ease of use & installation.
CDU is also available in Remote sensor with 10 meter cable option for RH + T measurement CDU is available in two display options either 4 digit 0.56” Red seven segment displays to Indicate Temperature, %RH and DP individually or 3.5" TFT LCD, CDU with LED display option has individual LEDs for Status indication for all three channels.
High and low alarm LED indications are settable using programming modes. One no potential free Digital Input for door status available in CDU with LCD option.
CDU has inbuilt buzzer for audible process value violation. Data acquisition can be done on SCADA/ PLC application through RS485 using MODBUS protocol.
CDU-LED version optionally also accepts Humidity and Temperature input through wireless zigbee network from Masibus make HT16Ew Humidity & Temperature Transmitter.
Designed using proven micro-controller technology, this Clean Room Display Unit has been validated to perform accurate and reliable performance in harsh field environment. 

Features:

- RH, Temperature and DP measurement- Advanced digital RH+T sensor technology- Calibration not required for digital RH+T sensor- Internal sensor option (Ease of installation)- Remote sensor option for RH+T measurement- Available in LED and touchscreen TFT LCD display options- 3 programmable alarms with visual annunciation- Software programmable channel ranges, units & input types- Real time clock with battery back-up- Synchronized with server clock over RS485- Data backfilling via DNP 3.0 avoiding data loss (optional)- RS485/MODBUS RTU multidrop communication for PLC, SCADA - FDA 21 CFR part11 compliant SCADA version also Datalogging- Optional Wireless connectivity available in LED version

Applications: 

- Pharmaceutical industry- HVAC (Heating, ventilation, air conditioning, cooling)- Blood stations, pharmacies- Horticultural and cultivation of plants- Pharma Environments monitoring applications- Data acquisition, analysis and processing

Additional Information:

• Item Code: CDU
• Production Capacity: Any
• Delivery Time: 12 Weeks
• Packaging Details: Industry Standard

Product Details:

Masibus’ 409-W Strain Gauge Indicator accepts strain gauge signalform strain gauge sensors such as load cells, pressure transducersand torque sensors and provide alarms, indicates value and alsoconverts into selected DC voltage or current output allowing directconnection to PLC’s, dataloggers & displays.5-digit, 0.56” red seven segment display facilitates the user tomonitor Strain gauge value. It displays field settable Gross or Netvalue.409-W Strain Gauge Indicator accepts field selectable load cell inputranging from -75 to 75mV DC. It has built-in factory set load cellexcitation voltage selectable from 5 to 15V DC. Tare adjustment canbe done through keypad / digital input.409-W Strain Gauge Indicator also provides relay output for alarm. It can be interfaced with SCADA/PLC system using optional RS485communication and analog retransmission output.Model 409-W is equipped with advanced functions like digitalfiltering, digital input and password setting for optimum processfunctionality.

Features:
- Signal conversion for use with PLC and SCADA systems- Selectable load cell input ranges- 5 Digit. 0.56” LED display- Load cell excitation voltage selectable from 5 to 15V DC- Tare adjustment through keypad/ DI- User selectable gross and net values- Zero and span calibration by front key-pad- Programmable high/low alarm relay- RS485 interface (optional)

Applications:

- Retransmission o/p (optional)
- Dynamic and static weighing application- Food processing equipment- Rubber press machine

Additional Information:

• Item Code: 409-W
• Production Capacity: any
• Delivery Time: 12 weeks
• Packaging Details: industry standard

Product Details:

Masibus' Model 1006H is compact panel mount Flow Rate Totalizerhaving 6-digit single display group for flow rate and batch total.Measured parameters are displayed with high accuracy and floating decimal point position.
If auxiliary power fail, the displayed Batch Total,Integrated total and all programming parameters are stored innon-volatile memory, and are automatically recovered when auxiliary power is restored.Model-1006H has optional two relays to configure simple batchingoperations with High/Low, Pre warn or End of process set points.Alarm/relay and data communication status are indicated on separate LEDs.
Model 1006H FIT is equipped with additional features like transmitter power supply to excite field transmitter, Isolated retransmission output for recorder and It has optional serial communication on RS485 over MODBUS RTU protocol for interfacing with SCADA/PLC, PC based data acquisition and reporting system.
The programming, calibration and operation of the instrument aredone by four simple keys. The instrument is provided with five-point calibration. The unit can be calibrated in installed condition itself by front panel keys at predefined points.

Operation of the instrument is menu driven. It has passwordprotection facility for protecting programmed data. Integrated total, batch total and roll count are cleared by special password. A selectable square root extractor function enables the output from a differential flow transmitter to be displayed in linear units.

Features:
-  Single input: Current, voltage, pulse input or Digital input    Square root extractor-  6 Digit Flow rate / Integrated Total with rollover count-  Programmable K factor for Frequency Input-  Programmable low/zero cutoff facility-  6-digit totalizer with password protected resetting-  Programmable time base Day/Hr/Min/Sec Options:          -2 Configurable relays for Flow/Batch          - Retransmission output (Isolated)          - RS485 serial communication (Isolated)

Applications:

Monitoring and controlling continuous and batch flow processes like:    - Fluid production    - Printing    - Packaging    - Length Measurement
    - Food Packaging

Compatible for Turbine, PD & Magnetic pickup flow elements

Additional Information:

• Item Code: 1006H
• Production Capacity: any
• Delivery Time: 15 weeks
• Packaging Details: Industry standard

Product Details:

Masibus LPI-1 series Loop Powered Indicator/ Self powerd indicator comes in four models; LED in Panel and Wall Mount as well as LCD in Panel and Wall Mount, to suit different viewing and mounting applications. All models are two-wire loop powered and need no Auxiliary power.

LPI-1 series Loop indicators are housed in compact with ergonomically designed front fascia, the panel mount models have an IP65 front panel whereas the Wall mount models qualify for IP65 housing, all models deliver an accuracy of 0.1% of FS combined with a low temperature drift.

The indication range can be easily scaled by 3 front pushbuttons, the scale can be set to any range between -1999 to 9999 for 4-20mA input, and reverse scaling is also possible.

Features

 

• 4-Digit LED or LCD display options
• Loop Powered with low voltage drop
• Reverse scaling for indication range
• Square root extraction
• Accuracy 0.1% of FS
• Panel or wall mounting options
• Easy configuration with pushbuttons
• Compact and IP65 front/housing

Applications

For Loop powered applications in Industries like

• Power
• Metals
• Chemicals
• Fertilizer
• Cement

Additional Information:

• Item Code: LPI
• Production Capacity: any
• Delivery Time: 12 Weeks
• Packaging Details: Industry Standard

Product Details:

The 40005E digital Bar Graph Display is an Enhanced version of our Legacy model 40005 Bargraph indicators, additional capabilities have been added by way of multi-serial ports, scanning speed and Relay outputs. The model is available in single channel and dual channel format.

Con guration
40005E is con gured using the front keyboard and display or PC based mbGRAPH Con guration Software supplied with unit. The unit has a 4 digit numeric and 101 segment Bars to display process Value, Alarm/Trip and communication status are displayed by discrete LEDs on front fascia.

 

Communication
40005E Digital Bargraph Indicator comes with one RS485 port as a standard, a second RS485 port as an option to enhance the communication capabilities of the unit and use it as an RTU, controller or protection device for parameters like Level, Vibration, Gas detection, etc.

Control or Alarm
An optional 4 Relay outputs can be freely mapped to any channel set points and con gured as control, Alarm or Trip functionality with Fail-Safe or Normal Logic. Any one relay can also be con gured as a watchdog output.

Analog Output
An isolated 4-20mA Re-Transmission output option is available for onward transmission to PLC/DCS/Recorder/SCADA

Enclosure
40005E is housed in a 144X72 mm extruded Aluminum enclosure with an IP54 front fascia. All  eld inputs are wired to a detachable back plate for ease of wiring and reduce down time during replacement

It also used as a bar graph process indicator,bar graph temperature indicator, LED Bar Graph Display application at various stage in any process industries.

Features

 

• Micro controller based
• Full 4 digit numeric & 101 segment bar display
• Universal Input
• Square root extractor
• Fully con gurable & programmable by front keypad or PC based mbGRAPH Con guration Software
• Digital calibration
• Watchdog output
• Power Supply, Input & Output Isolated for 1500VAC
• Built-in Transmitter Supply
• Options :
  • Analog output (Isolated)
  • Redundant RS485 serial port 4 Relay Output

Applications

• Monitoring of Level, Vibration, Flow, etc
• Alarm/Trip Unit
• On/o??? Controller
• Digital Switch
• Gas Detection
• Marine-Utility Monitoring on Ships

Industries

• Power Plant

Additional Information:

• Item Code: Bar-Graph-Indicator-40005E
• Production Capacity: Any Nos
• Delivery Time: 12 Weeks
• Packaging Details: Industry Standard