WAGO Wireless Devices

Product Details:

In order to furnish the variegated desires of our clients, we have brought forth an extensive consignment of PLC Control Panel

Product Details:

The Wireless Access Point enables wireless access to a machine or system. This wireless transmission can be performed via WLAN (IEEE802.11a/b/g/ d/n/r), Bluetooth® or Bluetooth® Low Energy in different operating modes.
For example, a tablet or smartphone can be used to access the control system of a machine via a radio connection. The device can also be configured to integrate a machine or system into an existing wireless network (e.g., WLAN network) as a client..

In the third main operating mode, a wireless transmission link for ETHERNET protocols (e.g., PROFINET, Modbus/TCP, EtherNet/IPTM ) can be established between two devices. In this gateway mode, the device is used as a cable substitute to create a robust, industry-proven Bluetooth® or WLAN link between two automation devices.
The Wireless Access Point is designed for through-panel mounting (cut-out = 50.5 mm) in the control cabinet. The Wireless Access Point is inserted through the panel cut-out and screwed from the opposite side via M50 nut. Wiring is performed inside the control cabinet.
The external side of the housing meets the IP67 protection class. Note: The Wireless Access Point is compatible with the Wireless ETHERNET Gateway. These devices can be used jointly in a network.

Additional Information:

• Item Code: 758-919
• Production Capacity: Any Nos
• Delivery Time: 6 Months
• Packaging Details: Industry Standard

Product Details:

Integrating machines and systems into the “Internet of Things” is incredibly quick and easy with the WAGO IoT Box MES 4G. This IoT Box also offers a wide range of communication and bus protocols for communicating with production control systems. The complete system is ready for immediate use and offers all the functions required for digitalization, from signal acquisition to cloud connectivity.The IoT Box was designed as a plug-and-play device – no hardware engineering is needed. Collected data is transferred to the desired IoT application with just a few parameter settings.
The hardware includes a controller with its own communication interface, I/O modules with analog and digital inputs/outputs and a 24 V power supply unit.The integrated 4G cellular modem provides a wireless connection to the Internet and includes a radio license for EU countries.Depending on the application, additional I/O modules can be added later to adapt the system to specific requirements.Manufacturing Execution Systems (MES)
This IoT Box includes:• Controller PFC200; 2nd Generation; 2 x ETHERNET, RS-232/-485, Mobile Radio Module 4G: 750-8217• Magnetic-Mount Antenna; with 2.5 m cable and SMA plug; GSM/UMTS/LTE/Bluetooth®/WLAN; 698-960, 1400-1518, 1710-2700 MHz: 758-975• Switched-Mode Power Supply; Classic; 1-phase; Output voltage: 24 VDC; Output current: 2 A; NEC Class 2; DC OK signal: 7871606• 8-Channel Digital Input; 24 VDC; 3 ms; 2-wire connection: 750 1415• 8-Channel Digital Output; 24 VDC; 0.5 A; 2-wire connection: 750-1515• 8-Channel Analog Input; resistance measurement; adjustable: 750-451• 4-Channel Analog Input; voltage/current; differential input; 16 bits; diagnostics: 750-471• End Module: 750-600• SD Memory Card; pSLC-NAND; 8 GB; Temperature range: −40 … +90 °C: 758-879/000-2108• Energy Data Management (EDM) application (installed and licensed)• Circuit breaker; 1-pole; C 10 A; 10 kA• Electrical circuit breaker; 1-pole; 24 VDC; 1 … 8 A• Set of wall-mount lugs• Cable grips M16; M20; M25• Connectors (plug and socket) for power supply

Additional Information:

• Item Code: 2854099
• Production Capacity: Any Quantity
• Delivery Time: 6 Months
• Packaging Details: Industry Standard

Product Details:

The Wireless ETHERNET Gateway simplifies creation of a wireless transmission link for ETHERNET protocols (e.g., PROFINET, MODBUS/TCP, Ethernet/IP).The gateway is used as a cable substitute to create a robust, industry-proven Bluetooth® or WLAN link between two automation devices.The gateways support various configurations and can therefore also be operated as an access point.IP65 protection class and an external antenna allow installation of the Wireless ETHERNET Gateway within a conductive housing. The external antenna must be mounted on the outside of the housing. Simple push-button operation rapidly connects two Wireless ETHERNET Gateways.Additional settings can be made via Web-Based Management.

Additional Information:

• Item Code: 758918000001
• Production Capacity: Any Quantity
• Delivery Time: 6 Months
• Packaging Details: Industrial Standard

Product Details:

Bluetooth® Adapter in Connection with 750 Series The Bluetooth® Adapter wirelessly connects a notebook computer with Bluetooth® functionality to the service interface of the coupler/controller. It also provides an active connection to a programmable fieldbus controller.As a cable substitute, the Bluetooth® Adapter allows communication between two fieldbus controllers, as well as between fieldbus couplers/controllers via WAGO software tools (e.g., WAGO-I/O-CHECK, WAGO-I/O-PRO).Configurable coexistence properties ensure trouble-free operation in the presence of other radio systems.Bluetooth® Adapter in Connection with 857 SeriesThe Bluetooth® wirelessly connects a notebook computer with Bluetooth® functionality to the service interface of a configurable 857 Series JUMPFLEX® Module.As a cable substitute, the Bluetooth® Adapter allows communication between JUMPFLEX® Modules and WAGO software tool (WAGOframe) or configuration APP for Android-based end devices.If required, adapter configuration may be performed via AT commands.The adapter is supplied via both service interface and power supply of coupler/controller or JUMPFLEX® Module.

Additional Information:

• Item Code: 750-921
• Production Capacity: Any Quantity
• Delivery Time: 6 months
• Packaging Details: As per Industry Standard