Omron Safety Components

Product Details:

Features:

• Safety door lock switch
• Four entry points for operation key
• Positively-guided contacts

Other Details:

• Direct opening mechanism (NC contacts only) added to enable opening contacts when faults occur, such as fused contacts.
• Safety of lever settings ensured using a mechanism that engages a gear between the operating position indicator plate and the lever.
• Equipped with a mechanism that indicates the applicable operating zone, as well as push-button switching to control left and right motion.
• Head seal structure strengthened to improve seal properties (TÜV: IEC IP67, UL: NEMA 3, 4, 4X, 6P, and 13).
• Wide standard operating temperature range: –40 to 80°C (standard type).
• Certified standards: UL, CSA, EN (TÜV), and CCC.

Product Details:

Features:

• Detects speed by two proximity sensors
• Adjustable speed detection threshold, to 10Hz
• Semiconductor outputs; screw or clamp terminals
• Compliant to Cat 3, PLd, and SIL 3

Product Details:

Features:

• Manual pull reset mechanism
• Broad range of actuators available
• Positively-guided contacts

Other Details:

• Lineup includes three contact models with 2NC/1NO and 3NC contact forms in addition to the previous contact forms 1NC/1NO and 2NC.
• M12-connector models are available, saving on labor and simplifying replacement.
• Standardized gold-clad contacts provide high contact reliability. Can be used with both standard loads and microloads.
• Conforms to EN115, EN81-1 and EN81-2.
• Certified standards: UL, EN (TÜV), and CCC

Product Details:

Other Details:

• Facilitates partial or complete control system setup.
• Solid-state outputs (excluding Expansion Units).
• Detailed LED indications enable easy diagnosis.
• TUV SÜD certification for compliance with IEC/EN61508 (SIL3), EN ISO13849-1 (PLe/Safety Category 4).
• Approved by UL and CSA.

New unit joins the Series with the following two additional features:

• OFF-delay time of up to 150 seconds can be set.
• Two logical AND connection inputs

Product Details:

Features:

• Forcibly guided contacts Conforms to
• EN 50205 4 or 6 pole models
• New G9SA-P models have NPN configuration
• Socket available with LED operation indicator

Product Details:

Features:

• Polymer housing
• Standard forcibly guided gold contacts
• One or two conduit entries

Other Details:

• Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and 3NC contact forms.(Slow-action models with MBB contacts are available.)
• M12-connector models are also available, saving on labor and simplifying replacement.
• Standardized gold-clad contacts provide high contact reliability.Can be used with both standard loads and microloads.
• Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
• Certified standards: UL, EN (TÜV), and CCC

Product Details:

OMRON Safety Mats continue on their unique path of evolution. On-site safety can be further improved by placing Safety Mats precisely in areas where other sensors do not reach. The Safety Mats elicit the full power of every location and are suitable for any application.

Other Details:

• Simple connection allows multiple mats to be joined together.
• A wide variety of mat sizes are available.
• Meets PLd/Safety Category 3 (EN ISO13849-1) requirements when used in combination with the safety controller G9SP or the safety mat controller MC3.
• Complies with North American safety standards, including ANSI/RIA15.06.

Product Details:

Features:

• Single or dual channel
• Conforms to EN 60204 and EN 954-1
• Up to 5 safety outputs
• Expansion output units available
• Two-hand controller available

Other Details:

• Four kinds of 45-mm wide Units are available: A 3-pole model, a 5-pole model, and models with 3 poles and 2 OFF-delay poles, as well as a Two-hand Controller. Also available are 17.5-mm wide Expansion Units with 3 poles and 3 OFF-delay poles.
• Simple expansion connection.
• OFF-delay models have 15-step OFF-delay settings.
• Conforms to EN ISO13849-1 (PLe/Safety Category 4) *.
• Both DIN track mounting and screw mounting are possible.

Product Details:

Features:

• Compact M18 threaded body
• Metal or plastic housing
• Plug-in or precabled
• IP67 enclosure rating
• Conforms to IEC 61496-1, EN 61496-1

Product Details:

Features:

• Simple wiring using screw-less terminals
• Easy Trouble Shooting with Status Indication
• Manual / Auto Reset
• Single or dual channel safety inputs
• Emergency Stop, Gate Switches, Light Curtain, Area Scanner connection

Other Details:

• 17.5 or 22.5 mm width to save mounting space
• Simple wiring using Push-In Plus terminal block
• Easy maintenance with status indicators
• One unit for various safety devices, from contact input to PNP input

Product Details:

Other Details:

• Lineup includes three contact models with 2NC/1NO and 3NC contact forms and MBB models in addition to the previous contact forms 1NC/1NO, and 2NC.
• M12-connector models are available, saving on labor and simplifying replacement.
• Standardized gold-clad contacts provide high contact reliability.
• Applicable to both standard loads and microloads.
• Variety of metallic heads available.

Product Details:

Features:

• Safety door hinge switch
• Directly mounts to hinge or guard
• Positively-guided contacts

Other Details:

• Lineup includes three contact models with 2NC/1NO and 3NC contact forms in addition to the previous contact forms 1NC/1NO, and 2NC. Models with MBB contacts are also available.
• Standardized gold-clad contacts provide high contact reliability. Can be used withboth standard loads and microloads

Product Details:

The Special Operation Key Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other  Equipment.

Features:

• Safety door lock switch
• Four entry points for operation key
• Positively-guided contacts

Product Details:

Other Details:

• Programming and Diagnostics Module (PDM) makes it easy to set functions.
• Series connection is possible only with the MSF4800A.
• Blanking can be set.
• Muting is possible only with the MSF4800A by using the  MS4800-RM6 Resource Module.

Features:

• Fix, floating blanking

Product Details:

Features:

• Supports a wide range of applications in combination with Safety Controller G9SP or Non-contact Door Switch Controller G9SX-NS
• Up to 30 units can be connected. Ideal for middle to large scale device applications.
• Contributes to shortening the time it takes to find the cause of failure by the switch's LED display patterns.
• Photocoupler monitor output allows connection to a general-purpose PLC (NPN type).
• Compatibility with the D40A allows standardization of machine design.
• Compact Non-contact Door Switch can be mounted from both sides.

Product Details:

Features:

• 3M safety field with 2 x 10M warning zones
• 4M safety field with 2 x 15M warning zones
• 50M Distance measurement (non safe) with 3M safety field and 2 x 10M warning zones
• 270 degree scanning range
• Up to 70 programmable zone sets
• Intrusion LED indication
• Integrated management by Ethernet

 

Other Details:

• Provides a safety circuit of PLd/Safety Category 3  (ISO13849-1) without a dedicated controller.
• Type 3 Safety Laser Scanner complies with IEC61496-1/-3.
• 70 sets of safety zone and warning zone combinations are available, supporting complicated changes in working environments.
• A safety radius up to 4 m and warning zone(s) radius up to 15 m can be set.
• The minimum object resolution can be changed to 30, 40, 50 or 70 mm.
• The response time is configurable from 80 ms to a maximum of 680 ms.
• Reference Boundary Monitoring function prevents unauthorized changes in the scanner position.
• Minimal down time, sensor block can be replaced without the need to reprogram.

 

Product Details:

Features:

• Fix, floating blanking
• In built muting

Product Details:

Features:

• Fix, floating blanking

Product Details:

Features:

• Models avalable with either one or two cables
• Compiles with American safety standard ANSI/RIA 15.06
• Available in black or yellow

 

Other Details:

• 1 and 2 cable types
• Meets EN ISO 13849-1 (PLd/Safety Category 3) and EN ISO 13856-1
• Can be used with MC3 Safety Mat Controller, SCC-1224A Safety Mat/Edge Controller or NX Safety Controller
• Complies with North American safety standards including ANSI/RIA 15.06

 

Product Details:

Features:

• Up to 30 units of D40A/D40Z Compact Non-Contact Door Switch can be connected to a single Controller.
• Logical AND connection function provides easy system configuration for partial stop and complete stop.
• Programless.
• G9SX-NSA provides simultaneous inputs of a Non-Contact Door Switch and a conventional key-insertion type Safety Door Switch.

Product Details:

Features:

• Safety door lock switch
• Solenoid lock / release mechanism
• Positively-guided contacts

Other Details:

• Auxiliary release key ensures easy maintenance and unlocks the door in the case of a power failure.
• Die-cast aluminum body incorporating a switch box with degree of protection satisfying IP67, UL, and CSA TYPE6P, 13.
• Equipped with a horizontal and vertical conduit outlet.
• Models incorporating easy-to-see indicators for monitoring and those using an adjustable Operation Key for a swinging door are available.
• The mounting direction of the head can be changed to allow the Operation Key to be inserted from four directions.