|Minimum Order Quantity||5 Piece|
|Brand||OMRON / SIEMENS / DELTA|
|Mounting Type||Dinrail / Panel Mount|
|Input Voltage||240 VAC|
|Maximum Input Voltage||500 VAC|
|Maximum Operating Temperature||60 Degree C|
|Pin Count||As required|
|Input Current||Switch Mode Power Supply|
|Minimum Order Quantity||1 Piece|
|Input Voltage||220VAC / 110VAC|
|Input Current||As per the rating|
|Power||As selected based on requirement|
SITOP smart is the high-performance standard power supply for automated machines and systems with 24 V or 12 V electronics. Despite its compactness, it offers outstanding overload characteristics. Its capacity of 1.5 times the rated current for 5 s/min also enables trouble-free connection of consumers that demand high power. And with the permanent load capacity of 120% nominal output, these compact power supply units are among the most reliable of their kind
To further increase the availability, the SITOP smart power supply units can be combined with DC UPS, redundancy and selectivity modules.To the top of the pageThe advantages at a glance
Small footprint thanks to compact design, no clearances required at the sides
"Extra power" with 1.5 times the rated current for 5 s/min for transient overloads
120% of the rated capacity can be used durably up to 45 °C ambient temperature (24 V models)
Signaling contact for "Output voltage OK" for easy integration into the system monitoring
Low energy consumption and minimal heat generation inside the control cabinet due to high
SITOP PSU100S: Automatic range switching 120/230 VAC
SITOP PSU300S: Wide -range input 3AC 400 – 500 V
Adjustable output voltage to compensate for voltage drops
Wide temperature range from -25 to +70 °C
Comprehensive certifications, such as cULus, ATEX, IEC or GL for all standard applications worldwide
|Model No||CliQ Series|
|Dimensions||100 x 32 x 100.6 mm,3.94" x 1.26" x 3.96"|
|Input Voltage||80-275VAC (120-300VDC)|
|Model No||PM Series|
|Dimensions||209.5 x 127 x 40 mm,8.25" x 5.00" x 1.57"|
|Model No||PJ Series|
|Dimensions||76.2 x 50.8 x 23 mm,3.00" x 2.00" x 0.91"|
The PJ Open Frame series offers varieties of nominal output voltage with versatile configuration options as follows.
|Minimum Order Quantity||5 Piece|
|Power||110 VAC / 240 VAC INPUT|
|Phase||1PH & 3 PH|
|Input Voltage||110 VAC / 240 VAC INPUT|
|Rated Power||24 VDC 12 VDC|
|Output Power||24 VDC 12 VDC|
What Is a Power Supply?
To obtain electricity, we use commercial AC power that is sent from power plants. But the integrated circuits and electronic components used inside office automation equipment, factory automation equipment, and other electronics cannot be operated with the AC voltage, and they will be damaged by the high voltages.
Stable DC voltages are required to operate these integrated circuits and electronic components.
The device that converts commercial AC power to regulated DC power is called a regulated DC Power Supply.
There are two main methods for controlling regulated DC Power Supplies.
Switch-mode Power Supplies and Linear Power Supplies are regulated DC Power Supplies, which are generally referred to as Power Supplies. Currently, Switch-mode Power Supplies are the most common because they are compact, lightweight, and highly efficient.
Configuration and Principles
Switch-mode Power Supplies
Switch-mode Power Supplies take commercial AC power as the input and convert it to high-frequency power using the high-speed switching of semiconductors to obtain the required direct current. Switch-mode Power Supplies are used for most electronic devices as Power Supplies because they are compact, lightweight, and highly efficient.
Compact, and light.
A wide input voltage range.
Noise is generated due to high-frequency switching.
Large inrush current on the primary side.
*A Power Supply generally has a noise filter and inrush current control circuit to reduce the noise and inrush current.